Loading...
Thumbnail Image
Publication

A Hardware Framework for Yield and Reliability Enhancement in Chip Multiprocessors

Citations
Altmetric:
Abstract
Device reliability and manufacturability have emerged as dominant concerns in end-of-road CMOS devices. Today an increasing number of hardware failures are attributed to device reliability problems that cause partial system failure or shutdown. Also maintaining an acceptable manufacturing yield is seen as challenge because of smaller feature sizes, process variation, and reduced headroom for burn-in tests. In this project we investigate a hardware-based scheme for improving yield and reliability of a homogeneous chip multiprocessor (CMP). The proposed solution involves a hardware framework that enables us to utilize the redundancies inherent in a multi-core system to keep the system operational in face of partial failures due to hard faults (faults due to manufacturing defects or permanent faults developed during system lifetime). A micro-architectural modification allows a faulty core in a multiprocessor system to use another core as a coprocessor to service any instruction that the former cannot execute correctly by itself. This service is accessed to improve yield and reliability, but at the cost of some loss of performance. In order to quantify this loss we have used a cycle-accurate architectural simulator to simulate the performance of dual-core and quad-core systems with one or more cores sustaining partial failure. Simulation studies indicate that when a large and sparingly-used unit such as a floating point unit fails in a core, even for a floating point intensive benchmark, we can continue to run the faulty core with as little as 10% performance impact and minimal area overhead. Incorporating this recovery mechanism entails some modifications in the microprocessor micro-architecture. The modifications are also described here through a simplified model of a superscalar processor.
Type
thesis
Date
2009
Publisher
License
License