Loading...
Thumbnail Image
Publication

Comparison of Mixing Devices for Flow Injection Determinations Based on Doublet Peak Formation

Abstract
The well-stirred tank model accurately describes the separation (At) between flow-injection doublet peaks and has been found to be applicable to a variety of mixing devices that do not contain moving parts such as a magnetic follower. The reaction between lanthanum(III) and methyl thymol blue was used as a model reaction for a comparison study of mixing devices. Column and open-tubular reactors were included in the study. Mixing devices were compared on the basis of the straight line fit of At versus the natural logarithm of the concentration of injected La(III). The linearity of the At-ln[La(III)] plots was equivalent for several reactors. A mixing device composed of a column of alternating helices was selected as the best alternative mixer to the well-stirred tank when the magnitude of the slope of the plot and practicality were considered. Experiments showed that the well-stirred tank model qualitatively describes the behavior of these alternating helical reactors (AHR) in experiments designed to produce doublet peaks. The AHR was used as the mixing device in flow-injection determinations, based on doublet peaks, of zinc, hydroxide ion and of water hardness. A paired t-test showed that over the 16 determinations performed there was no significant bias at the 95% confidence level. Factors affecting the relative standard deviation of the concentrations measured are discussed.
Type
article
article
Date
1994
Publisher
Degree
Advisors
Rights
License
Research Projects
Organizational Units
Journal Issue
Embargo
DOI
Publisher Version
Embedded videos