Publication:
Analysis of Low-Induction Rotors for Increased Power Production

Simple item page
dc.contributor.advisorMatthew Lackner
dc.contributor.authorRees, Jack E
dc.contributor.departmentUniversity of Massachusetts Amherst
dc.contributor.departmentMechanical Engineering
dc.date2024-03-28T20:01:51.000
dc.date.accessioned2024-04-26T18:11:19Z
dc.date.available2024-04-26T18:11:19Z
dc.date.submittedSeptember
dc.date.submitted2022
dc.description.abstractWind turbine aerodynamics are characterized by several coefficients, most notably the thrust, power, and axial induction, which is the fractional decrease of the free stream wind speed to the rotor plane. Current turbine designs aim to maximize these coefficients to reach what is generally considered to be maximum aerodynamic efficiency. Such rotors are referred to as a Betz-optimal rotor. This thesis examines a new method called “Low-Induction Rotors (LIR)” for increasing aerodynamic efficiency by decreasing the thrust loading of the blade. A family of low induction rotors (LIRs) can be derived from a reference wind turbine (RWT) by using the root bending moment as a constraint. Using the root bending moment of the RWT and imposed loading, new rotor lengths are derived. The family of low induction rotors are characterized by lower thrust loading across the blade. Prandtl’s bell shaped loading distribution was used to define the distribution of spanwise thrust since it is better fit for long-thin airfoils. Momentum Theory and Blade Element and Momentum theory were used to solve for the rotor power coefficient in two different ways, either including or excluding tip-losses. The family of rotors was then analyzed to determine power output. It was found that more power was produced as the rotor length increases and thrust loading decreased. The National Renewable Energy Lab’s AeroDyn software was used to conduct cp-λ sweeps on 6 selected rotors (128m, 137m, 147m, 156m, 167m, and 177m) to determine how power output was affected by changes in wind speed. The cp-λ analysis showed that the longer rotors with lower induction were less sensitive to changes in wind speed. The low induction rotors minimized a change in the coefficient of power as the pitch and tip speed ratio were changed. Low induction rotors are a promising field of wind energy, while maintaining the forces are the turbine hub, longer rotors with lower aerodynamic loading can be used to generate a more stable power supply.
dc.description.degreeMaster of Science (M.S.)
dc.identifier.doihttps://doi.org/10.7275/30150405
dc.identifier.orcidhttps://orcid.org/0000-0003-3465-3993
dc.identifier.urihttps://hdl.handle.net/20.500.14394/32939
dc.relation.urlhttps://scholarworks.umass.edu/cgi/viewcontent.cgi?article=2285&context=masters_theses_2&unstamped=1
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.source.statuspublished
dc.subjectWind Power
dc.subjectTurbine
dc.subjectLow Induction
dc.titleAnalysis of Low-Induction Rotors for Increased Power Production
dc.typeopenaccess
dc.typearticle
dc.typethesis
digcom.contributor.authorisAuthorOfPublication|email:jackerees@gmail.com|institution:University of Massachusetts Amherst|Rees, Jack E
digcom.identifiermasters_theses_2/1258
digcom.identifier.contextkey30150405
digcom.identifier.submissionpathmasters_theses_2/1258
dspace.entity.typePublication
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Jack_Ellison_Rees_Thesis.pdf
Size:
3.2 MB
Format:
Adobe Portable Document Format
Name: Jack_Ellison_Rees_Thesis.pdf
Size: 3.2 MB
Kind: Adobe PDF
Collections
Masters Theses